If your receipt printer isn’t printing, check its power, paper and connection first. Then restart it and print a test receipt. These checks can help identify whether the fault is with the printer, its settings or its connection to the POS system. A methodical approach to troubleshooting receipt printer issues can also help fix blank, cut-off or crooked receipts without changing several settings at once.
A printer failure during a transaction is frustrating, but you can check the common causes step by step. This guide covers refreshing printer settings and running a test, loading paper correctly, adjusting print margins, and checking Ethernet or Wi-Fi connections. You’ll also learn what to look for in the printer’s lights and cables, and when a persistent fault may need technical support. Start with simple checks, then follow the steps that match the problem.
Key Takeaways
- Start with the printer’s power, paper and cable connections to narrow down why it isn’t printing.
- Refresh printer settings and use a test receipt to help identify whether the issue is with the printer or POS setup.
- Load the roll in the correct direction and adjust print settings to address blank, crooked or cut-off receipts.
- Check Ethernet or Wi-Fi settings when the printer disconnects, and recognise when a persistent fault needs repair support.
Why is my receipt printer not printing?
Check the printer’s power, paper and connection before changing any settings. A methodical approach to troubleshooting receipt printer issues can help isolate the fault, whether it involves the printer, computer or POS system.
Check Power, Status Lights, and Paper Loading
- Check that the power switch is on and the adapter is firmly connected. Turn the printer off for 30 seconds, then restart it. A solid green status light indicates it’s powered on. An error light can signal an empty roll, an open cover, overheating or a connection issue. Open the cover and check that paper feeds from the top of the roll. If red keeps flashing, fit a fresh roll and close the lid before testing a transaction.
Inspect Cable and Network Connections
- Check that USB and Ethernet cables are fully plugged into the printer and connected device. Look for damage or loose connections, then try another cable or port if available. For network printing, confirm the Ethernet cable connects to the router or network switch. Hold Feed while powering on to print a configuration page. Check the bottom receipt for an IP address; 0.0.0.0 indicates the printer hasn’t connected to the network.
Check Printer Drivers and Test Page
- Print a test page from the computer before sending another POS receipt. If it prints, the printer can receive a local job, so check which printer the POS system is set to use. If the test fails, inspect the driver. In Windows Device Manager, right-click the receipt printer and select Uninstall Device. Install the correct driver, then restart the computer to apply the configuration. This helps distinguish a driver problem from other troubleshooting receipt printer issues.
Clean the Thermal Print Head Safely
- Turn off the printer and open its cover before inspecting the print head. Gently wipe away visible dust or residue with a soft cloth. Don’t pull paper forcefully, as this can damage the cutter. Reload the roll neatly, close the cover and print a test. If output is still blank or faint, note the status light and test results before moving to the next diagnostic step.
Refreshing printer settings and printing a test receipt
Change one setting at a time and test before returning to a live transaction. This helps distinguish Windows, POS hardware and receipt-design problems.
Refresh Printer Settings
After checking the selected connection, restart the printer and POS system. This may make the receipt printer appear again among the available devices. In the POS hardware or device settings, select the correct printer and save the changes. Avoid changing several options at once. Testing after each adjustment shows which setting restores printing.
Set the Windows Default Printer
Open Windows printer settings and set the receipt printer as the default. Turn off “Allow Windows to manage my default printer”, then apply the change. This stops Windows from switching the default to another device. Return to the POS program and check its printer selection too, since the Windows default and POS default are separate settings.
Configure POS Hardware and Device Settings
Open the POS device settings and select the receipt printer for receipts. Set “Auto print receipts” to “Yes” if receipts should print after each sale. Choose 1, 2, or 3 copies to match the required transaction output. Save the configuration, then reconnect the printer or restart POS if the device doesn’t appear.
Adjust Receipt Logo Settings and Print a Test Receipt
Reduce or remove a detailed logo if receipts print slowly; complex artwork can delay output. Print a Windows test page, then make a test sale in the POS system. Check that a receipt appears, the text is legible, and copies match the selected setting. If the Windows test page still fails, printer repair support can investigate the hardware fault.

Correcting paper orientation and print margins
For cut-off receipts, select the receipt printer in Chrome and set the margins to Minimum. If paper feeds incorrectly or the print is faded, reseat the roll, check that its thermal side faces the print head, and replace any damaged or unsuitable paper.
- Open the printer cover and check that the paper roll matches the printer. Receipt printers commonly use 72mm or 80mm rolls. Feed paper from the top, not underneath, and make sure the printable thermal side faces the print head. If a receipt comes out blank, switch the roll’s orientation and test again. Position the roll evenly, then close the lid firmly.
- Turn off the printer before clearing a paper jam. Open the cover and carefully remove the jammed paper. Don’t yank it, as forceful pulling can damage the cutter. Reload the paper neatly, aligned with the guides. Avoid tugging the paper while printing, as a skewed roll can cause crooked receipts or another jam.
- In Chrome’s print window, set Destination to the receipt printer and choose the paper size that matches the roll. Set margins to Minimum, then turn off Headers and footers. These settings can reduce cut-off edges and excess blank paper. Check the preview before printing: the wrong destination or page size can make the output look incorrectly scaled.
- Print a test receipt after changing the roll or Chrome settings. If paper feeds crookedly, check that the roll sits evenly, the guides are adjusted and the top lid closes properly. For faded output, confirm the roll is thermal paper and loaded correctly, then try a fresh roll. If the text still looks faint, gently wipe residue from the print head with a soft cloth.
How to check receipt printer power, cables, and network connection
- If the printer won’t turn on, check the power switch, wall outlet and adapter. Make sure the adapter is firmly connected at both ends. If the outlet works with another device but the printer remains off, inspect the adapter and cable for visible damage. A power fault can prevent status lights and network checks from working.
- For a connection refresh, turn off the printer and unplug its cables. Wait 30 seconds before reconnecting them, then restart the printer and POS system. Check USB, Ethernet or Serial connections at both ends. If the printer reconnects after changing a cable or port, the original connection may have been loose or unstable.
- Watch the printer’s status light after restarting. A slowly flashing red light indicates a network connection problem. Print a configuration page to inspect its network details. If the page shows 0.0.0.0, the printer hasn’t connected to the network; check its Ethernet cable and router connection.
- Compare the printer’s IP address with the register’s network details. Example addresses for devices on the same network are 192.168.1.10 and 192.168.1.11. These are examples, not required addresses. If the printer has no assigned address, check its connections, restart the router, then print another configuration page.
- For Ethernet or Wi-Fi, confirm the printer and POS device are connected to the correct network. Restart the router, then reconnect the printer. Network interruptions, a worn cable or overheating can cause disconnections, including during busy periods. Keep the printer ventilated and check that the network cable is intact.
- If power is present but the printer repeatedly loses its network connection, record its light pattern and configuration-page details. These clues help narrow down the fault before repair. Arrange receipt printer repair support if cable, router and connection checks don’t restore stable printing.
Aspire Computing: Printer Supply and Repair
Aspire Computing provides Printer Supply and Repair when a receipt printer still fails after you’ve checked its power, paper, settings and network connection. Recurring disconnections, failed test prints or persistent errors may point to a fault that needs hands-on diagnosis. Repair can help identify whether the issue is with the printer, its cables or its setup, so you can decide on a practical next step. If the computer connected to the printer is also affected, PC and Laptop Repair can address that related issue. Share what you’ve tested and describe any error lights or messages. Contact Aspire Computing to discuss your receipt printer issue.
Keep your checkout ready for the next transaction
Recurring printer faults are a useful prompt to review how your checkout setup is maintained. Keep a brief record of error messages and when printing fails. This can help distinguish an isolated interruption from a recurring problem and give a technician useful context if the fault continues.
Troubleshooting receipt printer issues can also reveal a wider computer problem. Aspire Computing offers PC and Laptop Repair, Hardware Upgrades and Data Recovery Services for related technology needs. The right support depends on what is failing, so describe the symptoms and steps you’ve already tried when you get in touch. This helps focus the conversation on a practical next step instead of making further changes blindly.
Contact Aspire Computing about printer help to discuss the issue and find a clear way forward.
Frequently Asked Questions
How do I troubleshoot a receipt printer that will not print?
Check whether printing fails in every program or only in the POS application. Send a small print job from another application or computer. If it prints, check the POS device assignment or receipt setup. If no application can print, look for paused or stuck jobs in the computer’s printer queue, then confirm that the selected printer matches the connected device.
How do I fix a receipt printer paper jam or blank receipts?
Turn off the printer before clearing a jam. Remove trapped paper without using sharp tools or forcing the cutter. Check inside the paper path for small torn scraps, which can obstruct feeding even after the main piece is removed. For blank output, test with a fresh thermal roll and check that it is loaded the right way around.
How do I install or update receipt printer drivers on Windows and Mac?
Use the driver intended for the exact printer model and operating system. On Windows, remove the old device entry before installing the replacement driver, then restart the computer. On Mac, open Printers & Scanners in System Settings, remove the printer if its entry is outdated, and add it again after installing the driver. Choose the matching USB or network connection.
How do I troubleshoot receipt printer connectivity with a POS system?
If the computer can print but the POS cannot, check the printer assignment in the POS application. A POS system may have separate device settings for different registers, so confirm the affected terminal is set to the correct printer. If only one terminal has a problem, compare its device selection with a working terminal before changing network settings.
How do I test and reset an Epson, Star Micronics, or Bixolon receipt printer?
Many receipt printers can print a configuration page for a basic test when you hold Feed while powering on. This output can show the printer’s current settings and network details. Epson, Star Micronics and Bixolon models may use different reset procedures, so follow the sequence for the exact model. Avoid a factory reset until you know which settings it will change.
B.App.Sc., Cert. Computer Engineering PC Service and Repair
As the owner of Aspire Computing founded in 1999, Chaim Lee has been working for over 20 years as the Leading Computer Technician.
He has a life long interest in electronics, computing, science and technology. He has completed studies and gained qualifications in Applied Science, Computer Repair and Service, Microsoft Installation and Maintenance, Technical Writing, Workplace Training, and Technical Sales Training.

